Clean and simple. Built for off-road riding. With no on-road extras, this is a solid mud-ready workhorse. All black, all rugged, and ready for a hard day’s work.
Built purely for off-road riding, this solid mud-ready workhorse is perfect for farm work and off-road adventures. With a robust alloy 3D frame, weatherproof construction, stainless steel spokes, durable componentry and a high-torque motor in each wheel, this bike is super robust.
SAFE & STABLE
No fuel, exhaust, or engine noise. No chains or heat. The electric-drive 2X2 eliminates many of the safety concerns of internal combustion motorcycles by design. Light, stable, and strong, the 2X2 Work Bike gives you complete control in all terrain.
QUIET & LOW IMPACT
Near silent motors let you enjoy the sounds around you without adding any noise pollution of your own or disturbing any stock. On an UBCO 2X2, you’ll save money on fuel and maintenance, reduce your emissions, and shrink your environmental footprint overall.
INTELLIGENT & CONNECTED
Connect and communicate directly with the bike’s on-board vehicle management system via the handy UBCO App. Take control with real time performance for your bike and customize your riding experience.
LIGHT & EFFORTLESS
Lightweight with no clutch, a low center of gravity, and step through frame, the 2X2 is easy to ride and maneuver. The electronic throttle is responsive to your riding and because the 2X2 is simpler to operate than other motorbikes, riding is intuitive and easy. Just twist the throttle and go!
Go wherever you want and bring anything you need on your 2X2. The strong alloy frame includes attachment points to secure and carry cargo, tools, or equipment. The 2X2 is so lightweight, you can even hitch one or two on the back of your car or truck for easy transport.
Weight excl. power supply: 50.7kg | 111.6lbs
+ 2.1kWh battery: 63.7kg | 140.2lbs
+ 3.1kWh battery: 68.7kg | 151.2lbs
Height: 1,040mm | 41”
Seat height: 815mm | 32”
Width (handlebars): 820mm | 32.3”
Length: 1,820mm | 72”
Wheelbase: 1215mm | 47.8”
Max speed: 50km/h | 30mph (45km/h EU). High torque geared drivetrain. Wheelbase: 1215mm | 47.8”
All wheel drive with 2 x 1kw Flux² motors: Brushless DC air cooled. High durability planetary geared system. Fully splined gear interfaces. Sealed bearings. Active heat management. Active venting for residual moisture.
UBCO Quadratic² brake system: Hydraulic & regenerative brakes operate together. Active regenerative braking (brake activated): Independent front and rear brake control. Passive regenerative braking (off throttle). DOT approved hydraulic brakes. 203 x 2.3mm rotors. DOT approved Dash 3 brake lines.
9ga stainless steel spokes.
Tangential double-crossed lacing pattern. 17×1.85” aluminum rims (DOT compliant). 17×2.75” off-road knobbly tires.
Payload (incl. rider): 150kg | 330lbs
Super X step through frame: 7027 alloy. Front and rear racks standard. 19 drop forged attachment lugs on sub frame & rack. Dual kickstands (stand bike on either side).
UBCO ATFZ 130mm front suspension: Tapered chromoly steerer, chrome steel stanchions, alloy lower (corrosion resistant). Coil spring with hydraulic dampener. Preload & rebound adjustment.
UBCO ATF 120mm rear suspension: Coil over spring with hydraulic dampener. Preload & rebound adjustment.
Fully electronic throttle control. Handlebar mounted momentary switch control for horn. Keyless fob operation utilises code hopping technology, hard to clone or hot wire. Kill switch can be programmed for on/off.
Match the capacity to your needs: 2.1kWh or 3.1kWh.
UBCO dual safety system:
Active Safety: UBCO ‘Scotty’ battery management system (BMS). Real time performance and safety monitoring.
Passive Safety: IP66 rated sealed alloy enclosure. Vented enclosure with venting pathways. 3400 mAh high safety factor INR (LiNiMnCoO₂) 18650 lithium ion cells. Designed for disassembly at end of life.
Cerebro² vehicle management system (VMS): Integrates all electronic and electrical functions of the vehicle. Provides control and updates with Bluetooth 5.0. Vented waterproof enclosure with sealed automotive connectors. Isolated CAN bus for easier integration of future CAN devices. CAN communication with power supply. Support for optional UBCO ‘Communicator’ telematic control unit for fleets.
WMC PIN coded off road vehicle.
NOT road registrable:
EU: CE Compliant for off-road use in Europe. Can be registered as a farm/work vehicle in some European jurisdictions.
AU: RVCS approved for off-road use in Australia. Can be approved for a conditional registration for farm use.
NZ: Compliant for off-road use in NZ.
10amp alloy fast charger. Charger detect disables bike when charging.
Powerful 2400 lumen floodlight headlight. Compact and lightweight. Environmentally sealed. LED rear brake lights.
Battery locks to frame. Ability to track & trace with optional TCU.
2X2 FIELD KIT
Fastens under the lift-up seat.
Contains user manual and tools to set up and maintain your bike.